Take factory orders
Product features:
2.54mm foot distance (0.1 inch foot distance);
In-line (DIP)/Patch (SMT)
·Standard gold-plated contact;
·Attached with electrically resistant high temperature film;
·High temperature resistant plastic body design.
Product category: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 12
Product model description: Example: DSIC04LHGET
DS ---stands for Dip Switch
IC---- Indicates the 2.54mm foot spacing
04----means 4 digits (or 4Ps)
L------means push twist high push (also: S is flat push T is flat push glue)
H---- indicates H-shaped pins (the plug-in has A and H-shaped pins; The patches are S, J and Z shaped)
GE-- stands for gold plating
T-----means IC tube pack (letter R means roll pack)
Product performance:
1. Rated current: switching current 25mA,24VDC, non-switching current 100mA,24VDC.
2. Contact impedance: initial value 50 milliohm, 100 milliohm after life measurement.
3. Insulation impedance: 100MΩ Min at 500VDC.
4. Withstand voltage: Input ac 500v (50~60 Hz) electrical voltage between the row pins, and the induced current is 2m(A) in one minute.
5. Operation strength: maximum 1000gf.
6. Life test: 3000cycles.
Material:
1. Top cover and body: Engineering plastic in line with UL94V-0 fire rating of high temperature material, (PPS) black.
2. Push button: Engineering plastic conforms to UL94V-0 fire rating of high temperature material, (PA46) white.
3. Fixed contact and movable contact: copper alloy gold plated; Pin: gold plated copper alloy.
4. Attached film: high temperature resistant film
Welding method:
1. Hand welding: No more than three seconds above 350 degrees Celsius or no more than five seconds within 270 degrees Celsius.
2. Reflow welding: within 260 ° C ±5 ° C 10 seconds, please set the push button in the "OFF" position during welding and cleaning.
Packing: IC tube pack or roll pack
Product Description
Audited Supplier 
){kind=link}